WHAT IS CARBON BLACK?

Carbon black is an almost pure elemental carbon consisting of glue-like particles produced by the incomplete combustion or thermal decomposition of gaseous or liquid hydrocarbons under controlled conditions. It consists of fine particles mainly made up of carbon. Carbon Black is classified at the production stage. Ironworks is the most widely used method of carbon decomposition and it is used in the industry at various levels from rubber reinforcement to coloring. Carbon Black is mostly used in tires, it is an excellent rubber reinforcer, however, its usage area has expanded with other chemical products due to its unique properties. It is also used in the industrial rubber, plastic and ink industry.

BASIC PROPERTIES OF CARBON BLACK
I2.NO: I2.NO measures the amount of iodine absorbed on the surface of a given mass of carbon black. The iodine absorption number is related to the grouping of carbon blacks.
It is detected from the surface area of ​​carbon blacks.

D.B.P. : D.B.P absorption number shows the structure of Carbon Black in quantitative form as chemical analysis separation, the amount of D.B.P data the form can take before it becomes sticky gel. The oil absorption rate of Carbon Black is due to the condensation of rubber materials in the process and curing phase.
It is the number that results from the formation of Carbon Black.

HEAT LOSS
The heat loss of carbon black is important in determining the moisture content. Detection of heat loss is carried out at 125 ° C. Carbon black is hygroscopic.
The amount of moisture absorbed varies depending on the surface area of ​​the black and the relative humidity, ambient temperature and time the material is exposed to.

GRAIN HARDNESS
Particle hardness is the force intensity that occurs when a single grain is broken by the applied force.
Carbon Black, which is present in some chemical components in the distribution in later stages, is affected by the hardness of the grain.

FINE GRAINS
Pellet grains are produced when mass and particles are shaken in the chemical process for 5 minutes and then pass through a 125 micron sieve.
The fine structure of carbon black is related to the level of bulk fluidity, dust and, in some cases, dispersion of the masses.

ASH
The ash content of a carbon black is related to the amount of non-carbon components found after combustion.
The main contributors to ash formation are the production sap and chemical stock catalysts.

SIEVE REMAIN
Sieve residue is manifested in non-dispersible substances (such as coal, heat resistant particles, water soluble salts and metal oxides)
Carbon is defined as a percentage by weight of Black.

USE OF CARBON BLACK
Carbon Black element; It is one of the basic raw materials generally used in the tire industry. Different of Carbon Black
grades are used as a colorant in the Plastic, Raw Material paint, Ink and Paint industry and depending on the density
can be evaluated.

CARBON BLACK SPECIFICATION
Based on the qualitative analysis of Carbon Black, the specification standards comply with International ASTM and Iran National regulations.
It is under the guarantee of our company that the production is under these conditions.

PRODUCT PACKAGING
In Tg Petrol A.Ş Company, product packaging is stacked and arranged in big or small sacks according to customer request. Package
They vary according to weight, product density and customer preference.

QUALITY CONTROL TESTS
The quality of carbon black is determined by considering the determined values ​​followed and applied by Tg Petrol A.Ş. and the fixed qualitative analysis criteria.
proportions.

PRODUCTION SECURITY
MSDS (Product Safety Usage Certificate): Following the processes that may occur against potential health threats in Carbon Black application
It is the product safety certificate that is mainly used against urgent chemical reactions.

CERTIFICATES AND AWARDS
Tg Petrol A.Ş Company has gained a prestigious place in the trade world with its performance as an employer since the past, and with its justified praise.